TECH UPDATE: Midwest Mods and Street Stock Shocks

PrintFriendly

The WISSOTA board would like to present the following tech updates in relations to the shocks of the Midwest Modifieds and Street Stocks. (Updates as of 1/24/13)

Midwest Modifieds

·         Shocks must be steel non-adjustable.

·         No remote or external canister type shocks allowed.

·         No bulb tops allowed. May have aluminum removable bushing on shaft end of body.

·         Bearing holder/ eyelet may be removable from body, but must be steel.

·         No Schrader or bladder style valves allowed.

·         May have aluminum heim joint on shaft end.

·         Aluminum shock extensions allowed.

 

Street stocks 

·         Shocks must be mounted on the stock upper and lower mounts.

·         No modifications allowed on shock mounts and mounts must be in stock locations.

·         No tie rod end, heim joint end or aluminum shocks allowed. One shock per wheel for a total of 4 shocks per car.

·         No coil over shocks allowed.

·         No spacers of any kind allowed. Shocks must be steel, non-adjustable.

·         No remote or external canister type of shocks allowed.

·         No bulb tops allowed.

·         May have aluminum removable bushing on shaft end of body.

·         Bearing/ eyelet may be removable from body, but must be steel.

·         No Schrader or bladder style valves allowed.

·         Must use stock type shock ends on top and bottom.

If you have further questions pertaining to these updates or any other rule, contact: Bill Engelstad at (218) 262-5823 or bill@wissota.org.